EA BDX

BDX Specifications:

  • Wingspan: 2.65m / 104 Inches
  • Length: 2.8m / 110 Inches
  • Weight: 40-42 Lbs
  • Power: 180N-210N

ARF Kit Includes:

  • Hardware
  • Linkages
  • High-Flow Fuel Fittings
  • 6.0L Fuel Cell
  • Stainless dual wall thrust pipe
  • JP ER200 Electric landing gear or optional Electron landing gear with GS 200
  • Standard wing, vertical and horizontal stabilizer covers
  • Carbon Fiber wing and vertical and horizontal tubes

PNP Kit Includes:

  • (8) Pre-installed HV servos with an incredible 500 oz in (36kg) of torque.
  • All linkages installed and connected
  • 6.0L Fuel cell installed with high-flow fittings and all fuel line ran
  • UAT installed
  • Wiring completed with MPX connectors and wire loom. Wiring is labeled and run to equipment tray
  • Installed Stainless dual wall thrust pipe
  • Electron ER 50 landing gear with GS-200 controller or JP ER 200 Electric landing gear installed
  • Just add receiver, gyro, turbine and you’re ready to FLY!
  • Hardware
  • Linkages
  • High-Flow Fuel Fittings
  • 6.0L Fuel Cell
  • Stainless dual wall thrust pipe
  • JP ER200 Electric landing gear or optional Electron landing gear with GS 200
  • Standard wing, vertical and horizontal stabilizer covers
  • Standard wing, vertical and horizontal stabilizer covers
  • Carbon Fiber wing and vertical and horizontal tubes

Kit Features:

  • Extensive Pre-fabrication
  • Painted outside mold with clear coat finish
  • Very light all composite sandwich layup
  • Center hinged rudder for precise centering and maximum travel
  • Two-piece fuselage disassembles easily
  • Removable vertical and horizontal stabilizers with one bolt
  • Carbon fiber reinforcement throughout
  • Carbon fiber wing and spar tubes
  • Fuselage, wing, rudder and stab covers
  • Diverse speed envelope, highly maneuverable while maintaining outstanding slow speed performance

Pricing:

  • Introductory ARF price $6795(JP landing gear) $6995 (Electron landing gear and GS 200 controller)
  • Introductory PNP price $7995(JP landing gear) $8295 (Electron landing gear and GS 200 controller)
  • Custom paint schemes available, add $500

Optional Accessories:

  • Stainless steel tail cone $150
  • Custom Wire Harness for ARF version $299
  • Smoke tank and smoke hardware $149
  • Large size UAT $125
  • Revoc wing/stab/rudder bags in black, red or grey $350
  • Light sets starting at $350
  • Custom build service $1500 and up depending on options
  • 499 oz. in HV servos
  • Kingtech Turbines

BDX Setup Notes

Servo arm lengths:

Aileron 1.5″

Elevator 1.5″

Rudder 1.5″

Flaps 1″

Control Throws:

  • Aileron: 12mm (Low Rate) 20mm (High Rate) *Measured from tip of surface*
  • Elevator: 10mm (Low Rate) 13mm (High Rate) *Measured from tip of surface*
  • Rudder: 75mm plus from base
  • Takeoff flaps 25mm from aileron, Landing flaps 90mm from aileron. ** Mix 3-4mm down elevator with full flaps.
  • Differential: 10%

Exponential:

  • Aileron 25-35%
  • Elevator 25-35%
  • Rudder 15%